DIY SNOWGLOBE

BY: EVONNE PAPIO

Materials:
- Glass Jar
- Glitters
- Water or baby oil
- Small figurines that can fit inside your jar
- Super glue
- Decorations (optional)




Procedure:
1. Clean out your jar to make sure that you can see clearly inside.
2. Remove the lid of the jar and flip it over. Under the lid, position your small figurines the way you want to but make sure they fit inside the jar and you can close the jar securely.
3. When you are satisfied with the positions, glue the figurines in place with the superglue.
4. While the glue is setting fill the jar almost to the top with water or baby oil.
5. To test if you have the right amount of water, insert the lid with the figurines into the jar. Make sure it is tightened and turn it upside down to test the water level. Ensure that the water is over the top of the figurines, with a little room to spare at the top.
6. Remove the lid again and add glitter to the water and stir.
7. With the super glue run a ring inside the lid and as quickly as you can close the lid on the jar and tighten it.
8. You are finished and ready to shake.

Comments

Popular posts from this blog